home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Columbia Kermit
/
kermit.zip
/
newsgroups
/
misc.19970929-19971216
/
000310_news@newsmaster….columbia.edu _Fri Nov 21 23:31:23 1997.msg
< prev
next >
Wrap
Internet Message Format
|
2020-01-01
|
3KB
Return-Path: <news@newsmaster.cc.columbia.edu>
Received: from newsmaster.cc.columbia.edu (newsmaster.cc.columbia.edu [128.59.35.30])
by watsun.cc.columbia.edu (8.8.5/8.8.5) with ESMTP id XAA03399
for <kermit.misc@watsun.cc.columbia.edu>; Fri, 21 Nov 1997 23:31:22 -0500 (EST)
Received: (from news@localhost)
by newsmaster.cc.columbia.edu (8.8.5/8.8.5) id XAA21814
for kermit.misc@watsun; Fri, 21 Nov 1997 23:31:21 -0500 (EST)
Path: news.columbia.edu!sol.ctr.columbia.edu!news.mindlink.net!demeter!van-bc!uniserve!sunqbc.risq.qc.ca!newsxfer.itd.umich.edu!quark.scn.rain.com!news.teleport.com!michael
From: michael@localhost.localdomain (Michael Powe)
Newsgroups: comp.protocols.kermit.misc
Subject: C-Kermit & 'old-telebit'
Date: 22 Nov 1997 04:29:35 GMT
Organization: Teleport - Portland's Public Access (503) 220-1016
Lines: 38
Message-ID: <slrn67co2i.713.michael@localhost.localdomain>
Reply-To: looie@teleport.com
NNTP-Posting-Host: ip-pdx35-10.teleport.com
X-Newsreader: slrn (0.9.3.2 UNIX)
Xref: news.columbia.edu comp.protocols.kermit.misc:8096
Hello,
This is kind of a desperation dive. I have a real honest-to-goodness
"old telebit" T2500 PEP modem that I am presently using as a backup.
I have a linux box & I am using the T2500 to establish a ppp
connection to my ISP. I cannot get kermit to handle the modem
properly. The "old-telebit" modem type is broken -- it will not
initialize my T2500, neither in Enhanced Mode nor in Conventional
Mode. So I have tried both creating a user-defined modem and simply
creating a new init string.
In the case of the user-defined modem, C-Kermit simply will not init
the modem. It aborts. I know the init string is good, I constructed
it right out of the manual (yes, I actually have the manuals, too!).
In the case of the new init string, C-Kermit gives me an error
message, saying it cannot properly init EC & DC & it thinks I have an
RPI modem. Then it dials ... pulse! I get connected, but now when I
exit kermit to load the pppd, it drops carrier.
The only way I can get anything like normal performance is to set
modem type hayes & just use the vanilla inits &c. This works, but it
ain't exactly high speed, since I'm getting xon/xoff flow control.
I'm just hoping someone might have some past experience with this
warhorse of a modem & might be able to help me out.
My init string was at&F&K3&S1S0=0E0Q0X4&D2&C1S110=1S96=1S66=1S95=2.
Thanks for any help.
--
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Michael Powe looie@teleport.com
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Please note that it may be necessary to use the "reply-to" address
to respond to this message.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=